DATA PRODUK

PRE-TREATMENT CHEMICALS

Product	Description / uses	Operating	Conditions
R-cleaner 101	1. use on aluminium and zinc alloys	R-Cleaner 101	3~5 %
	2. weak alkaline white powder	Temperature	40~60°C
	3. suitable for soak and ultrasonic	Time	2~20 min
R-Cleaner	1. use on steel /stainless steel/copper	R-Cleaner 302	3~5 %
	2. beige powder with strong degreasing powder	Temperature	50~80ºC
		Time	5~20 min
R-Cleaner 601	1. Electrolityc cleaner for steel / copper	R-Cleaner 601	5~10 %
	2. high eficiency cleaner	Temperature	50~90ºC
	3. long life span	Time	0.5~5 min
	4. can be used as both anodic / cathodic	Current density	3~5 A / dm²
R-Cleaner 905KF	1. pH neutral cleaner. Strong solvency	R-Cleaner 905KF	2~5%
	2. suitable for all metals especially	Temperature	40~60ºC
	heavily soiled parts;good for small parts	Time	2~20 min
	3. water based system. No phosphates
	and environment friendly
Klinol D	1. high efficiency liquid cleaner	Klinol D	3~10%
	2. suitable for all metals including aliminium	Temperature	40~80°C
	3. low foam; suitable for spray/immersion	Time	3~10 min
Klinol S	1. high efficiency acid cleaner	Klinol S	2~8 %
	2. to be added to HCL as acid cleaning	Temperature	30~50°C
	and mist suppressant	Time	5~30 mi
Klinol HT 174	1. acid pickle corrosion inhibitor for steel	Klinol S	3~5 %
	2. prevent basis metal attack after pickling	Temperature	15~40ºC
		Time	5~30 min
Klinol BW 7	1. polishing paste removal for steel/copper	Klinol BW 7	3~5 %
	2. strong detergency	Temperature	15~40ºC
	3. no attack an basis metal	Time	5~30 min

ZINC BRIGHTENERS

Product	Description / uses	Operating	Conditions
			Rack	Barrel
Zinklor HT 661	1. Potassium chloride based acid   brightener	Zinc chloride	45~70 g/L	40~70 g/L
	2. Good throwing power and good LCD	Pot chloride	180~220 g/L	180~220 g/L
	3. Can operate up to 50	Boric acid	25-35 g/L	25-35 g/L
	4. Easy waste water treatment	Zinklor HT 690 A	25~30 g/L	25~30 g/L
	5. Suitable for rack / barrel	Zinklor HT 690 B	1-2 ml/L	1-2 ml/L
		Temperature	15~50°C	15~50°C
Zinklor Z-669KA	1. Ammonium Chloride based acid zinc Brightener	Zinc chloride	40~50 g/L	40~50 g/L
	2. Good LCD plating	Ammonium Chloride	120~200g/L	150~200g/L
	3. Suitable for barrel / rack plating	Zinklor Z-669KA	30~35g/L	30~35g/L
		Zinklor Z-669KB	1.5~2.0 ml/L	1.5~2.0 ml/L
		Temperature	15~40°C	15~40°C
Zinklor RCF-4	1. Alkaline cyanide free zinc brightener	Zinc oxide	12~22g/L	12~22g/L
	2. No complexing agnet, easy water treatment	Coustic soda	130~140g/L	130~150g/L
	3. Even higj/low current density deposits	MCF~3	16ml/L	16ml/L
	4. High tolerance to metalic contamination	mcf~cure	4ml/L	4ml/L
	5. Stable chemistry	tempertature	15~30°C	15~30°C
	6. Ease of chromating	filtration	countinaous	countinaous
	7. Suitable for both rack / barrel
			Rack	Barrel
Zinklor HT 661	1. Cyanide zinc brightener	zinc oxide	25-50g/L	12-18g/L
	2. suitable for high / medium / low cyanides	sodium cyanide	56-120g/L	120-160g/L
	3. High brighteness	caustic soda	65-80g/L	65-80g/L
	4. Can operate up to 400C	purifier zc	2-4ml/L	2-4ml/L
	5. suitable for both rack / barrel	hp	3-4ml/L	3-4ml/L
		m-ratio	2.-3	2.-3

ZINC ALLOY PLATING ADDITIVES

Products	Description / uses	Operating	conditions	Barerel
Technozinc	1. Alkaline zinc/nickel technology	Zinc oxide	Rack	10g/L
	2. Nickel deposits of 1-16%	caustic soda	10g/L	150g/L
	3. High corrosion resistance	ZN483B	140g/L	10ml/L
	4. Uniform nickel deposits	ZN482SA	2ml/L	110ml/L
	5. Can be chromated with hexa-and-	ZN485N	100ml/L	20ml/L
	6. Stable chemistry	ZN484A	14ml/L	6.5ml/L
	7. Suitable chemistry	Temperature	1ml/L	20~25°C
	8. Suitable for automobile/air-conditioned parts	Cooling	20~25°C	required
		Filtration	required	continuous
		Anode	continuous	nickel plate
		Current density	electrolytic	0.8 - 1.5A/dm
		Anode:cathode	1.5-3.0A/dm	2 - 1 : 1
		ratio	2 - 1 : 1
				12 ~ 19g/L
Technozinc	1. Zinc / iron alloy plating chemistry	Zinc oxide	12.5 ~ 22g/L	130 ~ 190g/L
	2. High corrosion resistance to 240 hrs SST	Caustic soda	100 ~ 130g/L	15 ~ 20g/L
	3. iron content of 0.3 - 0.9%;	Sodium carbonate	15 ~ 20g/L	15 ~
	4. High plating rate	ZF571MA	12m/L
	5. Uniform plating deposits	ZF572MB	2 ~ 3ml/L
	6. Easily chromate with hexavalent / trivalent chromates	ZF573F	15 ~ 35°C
	7. Suitable for both barrel / rack	Temperature	continuous
	8. Suitable for automobile / fasteners etc	Filtration	steel
		Anode

ZINC POST TREATMENT / ROHS AND WEEE COMPILED

Products	Description / uses	Operating	conditions
R-Mate 7371W	1. Trivalent white chromate	R-Mate 7371W	50 ~ 60ml/L
	2. Room temperature operation	Temperature	20 ~ 33ºC
	3. SST 48 - 72 hours	Time	10 ~ 15 second
	4. Pure white deposit	pH	2.5 ~ 3.2
	5. Suitable for manual/auto line
R-Mate LCT	1. Economical trivalent blue	R-Mate LCT-5	30 ~ 40ml/L
	2. Dark blue color	Temperature	25 ~ 35°C
	3. Wide  pH operating range	Time	15 ~ 25 second
	4. Suitable for manual/auto line	pH	1.8 ~ 3.0
Tri-Mate 7172	1. High corrosion resistance trivalent blue	R-Mate 7371W	40 ~ 50ml/L
	2. Dark blue color	temperature	25 ~ 35ºC
	3. Wide pH operating range	Time	10 ~ 20 second
	4. SST 72 hours easily achieved for acid zinc without seal	Air transfer time	5 second
	5. Suitable for manual/auto line	pH
Tri-Mate HG8309	1. High corrosion resistance trivalent blue Rainbow for acid zinc.	T-MATE 8309	80 ~ 100ml/L
	2. Low consumption	Temperature	15 ~ 35°C
	3. Wide pH operating range / temperature	Time	25 ~ 45 second
	4. SST 96 hours without seal	pH	2.0 ~ 3.0
	5. Suitable for manual/auto line
Tri-Mate HG8370/83220	1. High corrosion resistance trivalent Rainbow for alkaline	T-Mate 8309	80 ~ 100ml/L
	cyanide free / cyanide zinc	Temperature	25 ~ 35ºC
	2. attaractive color	Time	25 ~ 45 second
	3. Wide pH operating range	pH	2.0 ~ 3.0
	4. SST 96 hours without seal
	5. Suitable for manual/auto line

ZINC ALLOY POST TREATMENT

Products	Description / uses	Operating	conditions
Tri-Mate 8415	1. Trivalent rainbow zinc/nickel chromates	Tri-Mate 8415	150~200ml
	2. Wide pH operating range	Temperature	50~60ºC
	3. High corrosion rasistance 1000 hrs	Time	45~60 seconds
	4. Whitout red rust	pH	1.6~2.2
	5. Suitable for nickel content 10~16%
Tri-Mate 8415	1. Trivalent rainbow zinc/nickel chromates	Tri-Mate 8415	150~200ml
	2. White pH operating range	Temperature	20~30ºC
	3. High corrosion resistance up to 1000hrs without red rust	Time	45~60 seconds
	4. Suitable for nickel content 10~16% of zinc alloy deposits	pH	1.0~1.5
Tri-Mate 8427	1. Trivalent black for zinc/iron chromates	Tri-Mate 8415	150~200ml
	2. White pH operating range	Temperature	90~110ml/L
	3. High corrosion resistance up to 1000hrs without red rust	Time	50~60º
	4. Suitable for nickel content 10~16% of zinc alloy deposits	pH	45~100 seconds
			2.0~3.0
Bonseal B214	1. Rohs/weee conformed sealing chemicals for chromates	Bonseal B214	30~200ml/L
	2. Improve corrosion rasistance by 50~100%	pH	9.0~11.5
	3. Water based chemistry	Temperature	20~60ºC
	4. Economical	Time	30~60 seconds

HEXAVALENT POST TREATMENT CHROMATES

Products	Description / uses	Operating	conditions
R-Mate 47HC	1. Hexavalent blue liquid	R-Mate 47HC	5~15ml/L
	2. High brightness	Temperature	20~30ºC
	3. High corrosion resistance SST 72 hrs for acid	Time	6~30 seconds
		pH	1.3~1.8
R-Mate 517	1. Hexavalen rainbow liquid	R-Mate 517	10~20ml/L
	2. High brightness / good ashesion	Temperature	20~30ºC
	3. Suitable for all zinc especially acid zinc	Time	4~20 seconds
R-Mate 615	1. Hexavalent black liquid for all zinc	R-Mate 615A	40~60ml/L
	2. High brightness	R-Mate 615B	40~60ml/L
	3. Phsphoric acid based system	Temperature	15~30ºC
	4. High corrosion resistance SST 144 hrs	Time	25~50 seconds

COPPER PLATING

Products	Description / uses	Operating	conditions
Cynostar	1. Copper strike for zinc die-cast	Cuprous cyanide	50~70g/L
	2. High leveling with bright deposits	Sodium cyanide	70~100g/L
	3. Fine plating deposits	Sodium hydroxide	1~3g/L
	4. High tolerance to metalic contamination	Cynostar STB	20~30g/L
		Cynostar 152	5~10ml/L
		Temperature	45~60ºC
		Current denisty	0.5~4A/dm²
Products	Description / uses	Operating	conditions
			Rack	Standard
Kupro 313	1. Acid copper brightener for plastic / steel plating	Copper sulfate	220~240mg/L	220mg/L
	2. Good adhesion with neckel	Pure sulfuric acid	50~80mg/L	65mg/L
	3. Low consumption	Chloride ions	30~120mg/L	80mg/L
	4. High tolerance to metalic contamination	313MU	8.0~12.0ml/L	10ml/L
		313A	0.7~0.8ml/L	0.8ml/L
		313B	0.5~0.6ml/L	0.6ml/L
		Current density	1.3~6.0A/dm²
		Temperature	20~33°C	28°C
		Anode	Phosphorised
			copper

BRASS PLATING

Products	Description / uses	Operating	conditions
Brassalt SCN 75	1. Golden yellow brass color	Brassalt SCN 75	100~150mg/L
		Ammonia	3ml/L
		Temperature	30~50°C
		Current denisty	0.3~0.7A/dm²
		Anodes	cu/zn : 60/40

NICKEL PLATING ADDITIVE

Product	Description / uses	Operating	conditions
Nickulite NK 811	1. High speed and high leveling	Nickel sulfate	260~320g/L
	2. Low consumption	Nickel chloride	50~70 g/L
	3. High ductility	Boric acid	35~45 g/L
	4. Good for general plating	NK 8600M	7~12 ml/L
	5. Good chrome receptivity	NK  8600	0.2~0.5 ml/L
		NK-1 wetter	2 ml/L
		Temperature	45~55ºC
		pH	4.2~4.8
		current density	1~4 A/dm²
	1. Medium speed with good leveling	Nickel sulfate	260~320g/L
Nickulite NK 811	2. High ductility	Nickel chloride	50~70 g/L
	3. Good receptivity for chrome	Boric acid	35~45 g/L
		NK 811 M	7~10 ml/L
		NK811	0.4~0.5 ml/L
		NK wetter	2 ml/L
		Temperature	45~55ºC
		pH	4.2~4.8
		current density	1~4 A/dm²
			High sulfate
Nickulite NK 766	1. Barrel nickel brightener	Nickel sulfate	200~250 g/L
	2. High ductility	Nickel chlroride	50~70 g/L
	3. Good low current density	Boric acid	35~45 g/L
	4. high tolerance to contamination	NK 766M	10 ml/L
		NK 766	0.4~0.5 ml/L
		NK wetter	2 ml/L
		Temperature	45~55ºC
		pH	3.8~5.5
		Current density	0.3~2 A/dm²
Satnik R16			Rack	Standard
	1. Satin nickel	Nickel sulfate	440~470g/L	450/g/L
	2. Uniform satin deposit	Nickel chloride	35~45g/L	40g/L
	3. Appealing color	Boric acid	35~45g/L	40g/L
	4. High hardness	R16MU	18~23m/L	20ml/L
	5. Can be chromiun plated	R16H	5~7ml/L	6ml/L
		R16S	0.4~0.5ml/L	0.5ml/L
		pH	4.1~4.5
		Temperature	50~60°C
		Current density	3~8A/dm²
Rinse	1. Dewatering agent to prevent water marks	Rinse Aid P1262	2~4ml/L
	2. Suitable for barrel nickel / electroless nickel	Temperature	20~60°C
	3. Low consumption	Time	2~10 seconds
		pH	6~8

CHROMIUM PLATING

Product	Description / uses	Operating	conditions
	1. Hard chrome plating	Chromic acid	250g/L
Micro-Chrome	2. High plating speed an at 27% efficency	HC 81 MU	25ml/L
HC81	3. High hardness, micro-crack	Temperature	55~60°C
	4. High brightness	Current density	20~60A/dm²
	5. No attack on anodes	Trivalent Cr3+	3-5g/L
Micro-Chrome	1. Micro-acrack decorative chrome	Chromic acid	200~240 g/L
HC82	2. High plating rate and at 27% efficency	82MU	30 ml/L
	3. High brightness	Trivalent Cr3+	1~4 g/L
	4. Low fluoride, less attack an LCD	sulfate	1.5~1.9 g/L
	5. Very good throwing power	Temperature	38~48°C
	6. Especially good for zinc die-cast	Current density	5~18 A/ dm²
		Be	18~21 Be’

ELECTROLESS NICKEL

Products	Description / uses	Operating	conditions
Nikchem 750			100L
	1. Medium phosphorus EN	Nikchem 750A	6.0L
	2. Regeneration of 5-10 cycles	Nikchem 750B	15.0L
	3. 16-25 µm/h	DI water	79.0 L
	4. High brightness	Temperature	82~97ºC
	5. Phosphorus content of 6.0-8.0%;	pH	4.2~5.5
	6. suitable for steel/copper and aluminium	Nickel in bath	5.0~6.0 g/L
		loading	0.6~2.5dm²
Nikchem 750
			100L
	1. Environment friendly mid-P EN	Nikchem 710A	6.0L
	2. Cadmium / lead free chemistry	Nikchem 710B	15.0L
	3. Regeneration of 5-8 cycles	DI	79.0 L
	4. 16-23 µm/h	Temperature	82~91ºC
	5. Phosphorus content of 6.0-8.0%;	pH	4.7~5.2
	6. suitable for steel/copper and aluminium	Nickel in bath	5.4~6.2 g/L
		loading	0.6~2.5dm²
			100L
Nikchem 833	1. High phosphorus EN	Nikchem 833A	6.0 L
	2. Cadmium / lead free	Nikchem 833B	16.0L
	3. Plating rate at 8~13 µm/h	DI water	78.0 L
	4. Semi-bright chemistry	Temperature	85~95ºC
	5. Suitable for steel/copper/aluminium	pH	4.7~5.2
	6. Phosphorus content of 10.5~13.0%;	Nickel in bath	4.9~6.0 g/L
		Loading	0.6~1.0dm²/L
Bondseal 212	1. Trivalent sealing liquid	Bondseal 212 A	80ml/L
	2. Suitable for electrolytic / electroless nickel	Bondseal 212 B	80ml/L
	3. Improve corrosion resistance	pH	4.2~4.8
	4. Color/brightness of nickel unaffected	Temperature	20~35°C
		Time	30~90 seconds

NICKEL STRIPPERS

Products	Description / uses	Operating	conditions
R-Jigstrip 87	1. Electrolytic stripper for nickel/copper On stainless	R-Jigstrip 87MU	300ml/L
	steel jigs	Water	700ml/L
	2. No attack on basis metal/plastisol	Temperature	30~60°C
	3. Stripping rate at 30um/hr	pH	6.0~7.0
	4. Environment friendly product	Current density	20`~60A/dm²
	5. Can be used on plastic or electrolytic nickel stripping	Voltage	8~12V
		Cathod	Stainless Steel
R-Stripper 05NC	1. Stripper for nickel on copper basis	05 part A (powder)	100g/L
	2. Contained corrosion inhibitor to prevent basis metal	05 part B (liquid)	10ml/L
	attack
	3. Non-poisonous	98% H2SO4	100ml/L
	4. Stripping rate about 15 microns / hr	Temperature	70~90ºC
R-Stripper 07NC	1. Non-cyanide stripper for nickel on steel	07 part A (powder)	125 g/L
	2. High efficiency	07 part B (liquid)	125ml/L
	3. Stripping rate at 20 microns / hr	Temperature	60~70ºC

OTHER PLATING AUXILLIARY PRODUCTS

Products	Description / uses	Operating	conditions
R-Bright E62	1. can be used on 3and 3 and 4 serises SS	E62	100%
	Electrolytic polishing	Tempt 3-series	60-75ºC
	2. High polishing rate	4-series	90-100ºC
	3. Long life span	Time	5-30 min
		Current density	6-15 A/dm²
		Density	1.74 g/cm³
R-Bright 968/969	1. Barrel chemical polishing on small	R-Vibro 968	10~50 ml/L
	Stainless steel parts	Temperature	20~60ºC
	2. Contained corrosion inhibitor	Time	5~25 min
	3. suitable for most SS parts		Polishing
			1~3%
			Polishing	Immersion
R-Vibro 990	1. Vibratory polishing chemical for	concentration	1~3%	10~20%
	Stainless/copper/brass	Temperature	Room	40~60ºC
		time	10~40 min	10~40 min
R-Bright CB	1. Environment friendly copper/brass	R-Bright CB	00~150ml/L
	Chemical polishing	50% H2O2	250~300ml/L
	2. No fumes / no bad smell	Temperature	25~40ºC
	3. Easy to use	Time	10~60 min
Bondeline 280	1. Zinc phosphating chemistry	Bondeline 280	56~60 g/L
	2. To improve corrosion resistance / adhesion of	Neutralizer A	1.6 g/L
	high end-products	Accelerator No 1	1.0~2.0
	3. Spray / immersion	Temperature	25~35ºC
		Time	1~20 min
Bondeline 448
	1. Manganese phosphate coating	Bondeline 448	55-70 g/L
	2. For high abrasion / friction products	Temperature	93~99ºC
	3. Coating weight %~40 g/m²	Time	15~30 min
Deoxide 019
	1. Degreasing/pickling / phosphating for	Deoxide 019	50~250 ml/L
	steel in one	Temperature	20~60ºC
	2. With corrosion inhibitor	Time	5~30 min
R-Guard PW-1	1. Water based lacquer for brass / copper	R-Guard PW-1	25 - 40%
	2. To protect copper / brass from oxidation	Time	10-30 seconds
	3. Can be applied onto zinc chromates	Temperature	20 - 400C
	to obtain uniform color

ALUMINIUM TREATMENT PRODUCTS

Products	Description / uses	Opersting	Conditions
R-Aluma 233CF	1. Cyanide free aluminium zincate	R-Aluma 233CF	200~300ml/L
	2. Excellent adhesion for subsequent palting	Temperature	25~45°C
	3. easy of waste treeatment	Time	20~80 seconds
		pH	13
R-Aluma EF-T2	1. Environment friendly trivalent aluminium	R-Aluma EF-T2	Rack	Barrel
	conversion coating		20~35%	10~25%
	2. Colorless to light yellow with corrosion	Temperature	25~45°C	25~40°C
	resistance of above 200 hr
	3. Improve adhesion of painting on aluminium	Time	3~8 min	1~3 min
	parts
	4. Immersion or spray application	pH	3.5 ~ 4.0	3.5~ 4.0
R-Aluma 119	1. Hexavalent based colorless conversion coating	R-Aluma EF-T2	45 kg / 1000L
	on alumunium
	2. Improve corrosion resistance and paint adhesion	Temperature	25~40°C
		Time	1~3 min
		pH	3.5~4.0
Anopro 1200	1. Anodizing additave	Sulfuric acid	16~20g/L
	2. to be added into anodizing bath	Anopro 1200	20~30g/L
	3. Improve efficiency by 25~30%	Oxalic acid	14~20g/L
	4. Energy savings by about 30%	temperature	20~25°C
		Current density	0.8~2.5A/dm²
Anopro 1300	1. High efficiency electrolytic dye	Sulfuric acid	16~20g/L
	2. Produce color with good light fastness	Anopro 1300	20~30g/L
		Stannous sulfate	14~20g/L
		Temperature	20~25°C
		Current density	0.2~1.0A/dm²
		AC rcctifier
R-Aluma	1. Room temperature sealing salt	Aluma seal SP1	4~6g/L
	2. powder form - very economical	Flouride content	50~100ppm
	3. good sealing without bloom	pH	5.2~6.2
		Temperature	20~30°C
		Time	1 min / micron